Properly Filling/Refilling an Aspire BDC Clearomizer

Finally something other than a review!  I’m actually pretty excited to write this guide.  This will help anyone out that’s interested in seeing how to fill an Aspire BDC clearomizer.

First thing I have to mention is that most bottom-fed coil clearomizers are filled this way.  However this one is written specifically for the Aspire BDC eGo threaded clearomizer.

Secondly you might see some liquid already in the clearomizer before I start filling up.  I decided to refill this clearomizer instead of starting a new one (saving a new one for a review).

Anyways… Here we go!

Properly Filling/Refilling an Aspire BDC Clearomizer
Time: 1-2 Minutes

Finally something other than a review!  I’m actually pretty excited to write this guide.  This will help anyone out that’s interested in seeing how to fill an Aspire BDC clearomizer.

First thing I have to mention is that most bottom-fed coil clearomizers are filled this way.  However this one is written specifically for the Aspire BDC eGo threaded clearomizer.

Secondly you might see some liquid already in the clearomizer before I start filling up.  I decided to refill this clearomizer instead of starting a new one (saving a new one for a review).

Anyways… Here we go!

Properly Filling/Refilling an Aspire BDC Clearomizer
Time: 1-2 Minutes

Step One:

Find your Aspire BDC Clearomizer and your favorite juice!  Easy right?

Step Two:

Unscrew the bottom connector.  The bottom connector connects this hardware to your device.  It also holds the head that vaporizes the juice.  Replacement of this head is quite simple but will be covered in another guide.

You will see a post running up through the center of the Apsire Clearomizer.  This post allows vapor to travel from the coils to your mouth.  It is important to not get liquid in that post during the filling process.

Step Three:

Carefully add your favorite liquid.  Some eliquid bottles don’t have a syringe tip like this one does so just be careful.  It is easier to tilt the tank and your bottle of juice to fill this instead of standing the tank straight up and down.

You want to fill the liquid right to the edge of that post.  When you are getting near the top of that post with your liquid you might have to slowly tilt the tank upright while applying less pressure to your eliquid bottle.  It is possible to get juice to be level to that post hole.

Step Four:

Put your connector back on the bottom of the tank.

Step Five: Regardless if this is just a refill or a brand new head in the tank it is very important to do roughly 15-20 priming puffs.  This gets the juice flowing into the coils.  If you would just fire the coil without doing this you will immediately get a burnt taste.

Quick Note: Some liquids are thinner than others.  You may not need to do 15-20 priming puffs.  If you start feeling juice splash on your tongue… STOP!  You might notice a little gargle after this happens.  Don’t worry.  Just vape it and it will slowly go away.

Step Six: Vape!


'Properly Filling/Refilling an Aspire BDC Clearomizer' has no comments

Be the first to comment this post!

Would you like to share your thoughts?

Your email address will not be published.

UTOPIAN VAPES © 2017 All Rights Reserved